Files
ComfyUI/comfy/memory_management.py

188 lines
6.9 KiB
Python
Raw Normal View History

import math
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
import ctypes
import dataclasses
import torch
from typing import NamedTuple
Threaded Loader performance fixes / improvements (+ Aimdo 0.4.6) (#14116) * memory_management: Add direct to read GPU mode Make destination optional (or make it optionally GPU) and use aimdo to file_read direct to GPU. * ops: Remove stream pin buffers and use aimdo reads This consumed too much RAM and its better to just take the hit on the CPU syncing back the stream on a short ring buffer. Aimdo implements this so just rip the stream pin buffer from comfy. * model_management: all active pin registration movement Its better to just let the active model load past the pin limit as pins and let the pins move around. The saves the HDD and SATA people disk traffic while only costing a few GPU syncs. * utils: use aimdo file handle This opens on windows with more favourable flags * mp: only count the model proper for loaded_ram and vram Exclude live loras from the numbers to avoid the case where the reported loaded memory exceeds the size of the model. This causes me confusion in the Kijai visualizer when it looked fully loaded but was hitting disk due to this accounding disrepency. * utils: add bit reverse utility useful for max scattering something ordered. * pinned_memory: Implement offload balancing Use a max scatter alogorithm to prioritize pins of the same size such that when doing a little bit of offloading it gets scattered, allowing the prefetcher to more evenly swollow the offload. * comfy-aimdo 0.4.7 Aimdo 0.4.7 implement VRAM buffer exhaustion predection to avoid early speculative load of weights that definately wont fix once the inference gets further in. * model-prefetch: consolidate pin ensures on the sync point This could happen mid prefetch block, cause a sync of the entire block and lose overlap. Get ahead of the problem with a free down at the natural compute stream sync point. * mm: Put a 2GB min on the pin ceiling This is reasonably bad if it starts causing swap pressure, moreso than during normal ram-cache proceedings. Clamp it. * add --fast-disk
2026-05-31 05:20:04 +10:00
import comfy_aimdo.host_buffer
from comfy.quant_ops import QuantizedTensor
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
class TensorFileSlice(NamedTuple):
file_ref: object
lock: object
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
offset: int
size: int
Multi-threaded load of models from disk (big load time speedups & Offload to disk) (CORE-43,CORE-152,CORE-164,CORE-165,CORE-117) (#13802) * model_management: disable non-dynamic smart memory Disable smart memory outright for non dynamic models. This is a minor step towards deprecation of --disable-dynamic-vram and the legacy ModelPatcher. This is needed for estimate-free model development, where new models can opt-out of supplying a memory estimate and not have to worry about hard VRAM allocations due to legacy non-dynamic model patchers This is also a general stability increase for a lot of stray use cases where estimates may still be off and going forward we are not going to accurately maintain such estimates. * pinned_memory: implement with aimdo growable buffer Use a single growable buffer so we can do threaded pre-warming on pinned memory. * mm: use aimdo to do transfer from disk to pin Aimdo implements a faster threaded loader. * Add stream host pin buffer for AIMDO casts Introduce per-offload-stream HostBuffer reuse for pinned staging, include it in cast buffer reset synchronization. Defer actual casts that go via this pin path to a separate pass such that the buffer can be allocated monolithically (to avoid cudaHostRegister thrash). * remove old pin path * Implement JIT pinned memory pressure Replace the predictive pin pressure mechanism with JIT PIN memory pressure. * LowVRAMPatch: change to two-phase visit * lora: re-implement as inplace swiss-army-knife operation * prepare for multiple pin sets * implement pinned loras * requirements: comfy-aimdo 0.4.0 * ops: remove unused arg This was defeatured in aimdo iteration * ops: sync the CPU with only the offload stream activity This was syncing with the offload stream which itself is synced with the compute stream, so this was syncing CPU with compute transitively. Define the event to sync it more gently. * pins: implement freeing intermediate for pinned memory Pinning is more important than inactive intermediates and the stream pin buffer is more important than even active intermediates. * execution: implement pin eviction on RAM presure Add back proper pin freeing on RAM pressure * implement pin registration swaps Uncap the windows pins from 50% by extending the pool and have a pressure mechanism to move the pin reservations om demand. This unfortunately implies a GPU sync to do the freeing so significant hysterisis needs to be added to consolidate these pressure events. * cli_args/execution: Implement lower background cache-ram threshold Limit the amount of RAM background intermediates can use, so that switching workflows doesn't degrade performance too much. * make default * bump aimdo * model-patcher: force-cast tiny weights Flux 2 gets crazy stalls due to a mix of tiny and giant weights creating lopsided steam buffer rotations which creates stalls. * ops: refactor in prep for chunking * mm: delegate pin-on-the-way to aimdo Aimdo is able to chunk and slice this on the way for better CPU->GPU overlap. The main advantage is the ability to shorten the bus contention window between previous weight transfer and the next weights vbar fault. * bump aimdo * pinning updates * specify hostbuf max allocation size There a signs of virtual memory exhaustion on some linux systems when throwing 128GB for every little piece. Pass the actual to save aimdo from over-estimates * tests: update execution tests for caching The default caching changed to ram-cache so update these tests accordingly. Remove the LRU 0 test as this also falls through to RAM cache.
2026-05-21 10:03:58 +10:00
def read_tensor_file_slice_into(tensor, destination, stream=None, destination2=None):
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
if isinstance(tensor, QuantizedTensor):
Threaded Loader performance fixes / improvements (+ Aimdo 0.4.6) (#14116) * memory_management: Add direct to read GPU mode Make destination optional (or make it optionally GPU) and use aimdo to file_read direct to GPU. * ops: Remove stream pin buffers and use aimdo reads This consumed too much RAM and its better to just take the hit on the CPU syncing back the stream on a short ring buffer. Aimdo implements this so just rip the stream pin buffer from comfy. * model_management: all active pin registration movement Its better to just let the active model load past the pin limit as pins and let the pins move around. The saves the HDD and SATA people disk traffic while only costing a few GPU syncs. * utils: use aimdo file handle This opens on windows with more favourable flags * mp: only count the model proper for loaded_ram and vram Exclude live loras from the numbers to avoid the case where the reported loaded memory exceeds the size of the model. This causes me confusion in the Kijai visualizer when it looked fully loaded but was hitting disk due to this accounding disrepency. * utils: add bit reverse utility useful for max scattering something ordered. * pinned_memory: Implement offload balancing Use a max scatter alogorithm to prioritize pins of the same size such that when doing a little bit of offloading it gets scattered, allowing the prefetcher to more evenly swollow the offload. * comfy-aimdo 0.4.7 Aimdo 0.4.7 implement VRAM buffer exhaustion predection to avoid early speculative load of weights that definately wont fix once the inference gets further in. * model-prefetch: consolidate pin ensures on the sync point This could happen mid prefetch block, cause a sync of the entire block and lose overlap. Get ahead of the problem with a free down at the natural compute stream sync point. * mm: Put a 2GB min on the pin ceiling This is reasonably bad if it starts causing swap pressure, moreso than during normal ram-cache proceedings. Clamp it. * add --fast-disk
2026-05-31 05:20:04 +10:00
if not read_tensor_file_slice_into(tensor._qdata,
destination._qdata if destination is not None else None, stream=stream,
Multi-threaded load of models from disk (big load time speedups & Offload to disk) (CORE-43,CORE-152,CORE-164,CORE-165,CORE-117) (#13802) * model_management: disable non-dynamic smart memory Disable smart memory outright for non dynamic models. This is a minor step towards deprecation of --disable-dynamic-vram and the legacy ModelPatcher. This is needed for estimate-free model development, where new models can opt-out of supplying a memory estimate and not have to worry about hard VRAM allocations due to legacy non-dynamic model patchers This is also a general stability increase for a lot of stray use cases where estimates may still be off and going forward we are not going to accurately maintain such estimates. * pinned_memory: implement with aimdo growable buffer Use a single growable buffer so we can do threaded pre-warming on pinned memory. * mm: use aimdo to do transfer from disk to pin Aimdo implements a faster threaded loader. * Add stream host pin buffer for AIMDO casts Introduce per-offload-stream HostBuffer reuse for pinned staging, include it in cast buffer reset synchronization. Defer actual casts that go via this pin path to a separate pass such that the buffer can be allocated monolithically (to avoid cudaHostRegister thrash). * remove old pin path * Implement JIT pinned memory pressure Replace the predictive pin pressure mechanism with JIT PIN memory pressure. * LowVRAMPatch: change to two-phase visit * lora: re-implement as inplace swiss-army-knife operation * prepare for multiple pin sets * implement pinned loras * requirements: comfy-aimdo 0.4.0 * ops: remove unused arg This was defeatured in aimdo iteration * ops: sync the CPU with only the offload stream activity This was syncing with the offload stream which itself is synced with the compute stream, so this was syncing CPU with compute transitively. Define the event to sync it more gently. * pins: implement freeing intermediate for pinned memory Pinning is more important than inactive intermediates and the stream pin buffer is more important than even active intermediates. * execution: implement pin eviction on RAM presure Add back proper pin freeing on RAM pressure * implement pin registration swaps Uncap the windows pins from 50% by extending the pool and have a pressure mechanism to move the pin reservations om demand. This unfortunately implies a GPU sync to do the freeing so significant hysterisis needs to be added to consolidate these pressure events. * cli_args/execution: Implement lower background cache-ram threshold Limit the amount of RAM background intermediates can use, so that switching workflows doesn't degrade performance too much. * make default * bump aimdo * model-patcher: force-cast tiny weights Flux 2 gets crazy stalls due to a mix of tiny and giant weights creating lopsided steam buffer rotations which creates stalls. * ops: refactor in prep for chunking * mm: delegate pin-on-the-way to aimdo Aimdo is able to chunk and slice this on the way for better CPU->GPU overlap. The main advantage is the ability to shorten the bus contention window between previous weight transfer and the next weights vbar fault. * bump aimdo * pinning updates * specify hostbuf max allocation size There a signs of virtual memory exhaustion on some linux systems when throwing 128GB for every little piece. Pass the actual to save aimdo from over-estimates * tests: update execution tests for caching The default caching changed to ram-cache so update these tests accordingly. Remove the LRU 0 test as this also falls through to RAM cache.
2026-05-21 10:03:58 +10:00
destination2=(destination2._qdata if destination2 is not None else None)):
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
return False
Threaded Loader performance fixes / improvements (+ Aimdo 0.4.6) (#14116) * memory_management: Add direct to read GPU mode Make destination optional (or make it optionally GPU) and use aimdo to file_read direct to GPU. * ops: Remove stream pin buffers and use aimdo reads This consumed too much RAM and its better to just take the hit on the CPU syncing back the stream on a short ring buffer. Aimdo implements this so just rip the stream pin buffer from comfy. * model_management: all active pin registration movement Its better to just let the active model load past the pin limit as pins and let the pins move around. The saves the HDD and SATA people disk traffic while only costing a few GPU syncs. * utils: use aimdo file handle This opens on windows with more favourable flags * mp: only count the model proper for loaded_ram and vram Exclude live loras from the numbers to avoid the case where the reported loaded memory exceeds the size of the model. This causes me confusion in the Kijai visualizer when it looked fully loaded but was hitting disk due to this accounding disrepency. * utils: add bit reverse utility useful for max scattering something ordered. * pinned_memory: Implement offload balancing Use a max scatter alogorithm to prioritize pins of the same size such that when doing a little bit of offloading it gets scattered, allowing the prefetcher to more evenly swollow the offload. * comfy-aimdo 0.4.7 Aimdo 0.4.7 implement VRAM buffer exhaustion predection to avoid early speculative load of weights that definately wont fix once the inference gets further in. * model-prefetch: consolidate pin ensures on the sync point This could happen mid prefetch block, cause a sync of the entire block and lose overlap. Get ahead of the problem with a free down at the natural compute stream sync point. * mm: Put a 2GB min on the pin ceiling This is reasonably bad if it starts causing swap pressure, moreso than during normal ram-cache proceedings. Clamp it. * add --fast-disk
2026-05-31 05:20:04 +10:00
if destination is not None:
dst_orig_dtype = destination._params.orig_dtype
destination._params.copy_from(tensor._params, non_blocking=False)
destination._params = dataclasses.replace(destination._params, orig_dtype=dst_orig_dtype)
Multi-threaded load of models from disk (big load time speedups & Offload to disk) (CORE-43,CORE-152,CORE-164,CORE-165,CORE-117) (#13802) * model_management: disable non-dynamic smart memory Disable smart memory outright for non dynamic models. This is a minor step towards deprecation of --disable-dynamic-vram and the legacy ModelPatcher. This is needed for estimate-free model development, where new models can opt-out of supplying a memory estimate and not have to worry about hard VRAM allocations due to legacy non-dynamic model patchers This is also a general stability increase for a lot of stray use cases where estimates may still be off and going forward we are not going to accurately maintain such estimates. * pinned_memory: implement with aimdo growable buffer Use a single growable buffer so we can do threaded pre-warming on pinned memory. * mm: use aimdo to do transfer from disk to pin Aimdo implements a faster threaded loader. * Add stream host pin buffer for AIMDO casts Introduce per-offload-stream HostBuffer reuse for pinned staging, include it in cast buffer reset synchronization. Defer actual casts that go via this pin path to a separate pass such that the buffer can be allocated monolithically (to avoid cudaHostRegister thrash). * remove old pin path * Implement JIT pinned memory pressure Replace the predictive pin pressure mechanism with JIT PIN memory pressure. * LowVRAMPatch: change to two-phase visit * lora: re-implement as inplace swiss-army-knife operation * prepare for multiple pin sets * implement pinned loras * requirements: comfy-aimdo 0.4.0 * ops: remove unused arg This was defeatured in aimdo iteration * ops: sync the CPU with only the offload stream activity This was syncing with the offload stream which itself is synced with the compute stream, so this was syncing CPU with compute transitively. Define the event to sync it more gently. * pins: implement freeing intermediate for pinned memory Pinning is more important than inactive intermediates and the stream pin buffer is more important than even active intermediates. * execution: implement pin eviction on RAM presure Add back proper pin freeing on RAM pressure * implement pin registration swaps Uncap the windows pins from 50% by extending the pool and have a pressure mechanism to move the pin reservations om demand. This unfortunately implies a GPU sync to do the freeing so significant hysterisis needs to be added to consolidate these pressure events. * cli_args/execution: Implement lower background cache-ram threshold Limit the amount of RAM background intermediates can use, so that switching workflows doesn't degrade performance too much. * make default * bump aimdo * model-patcher: force-cast tiny weights Flux 2 gets crazy stalls due to a mix of tiny and giant weights creating lopsided steam buffer rotations which creates stalls. * ops: refactor in prep for chunking * mm: delegate pin-on-the-way to aimdo Aimdo is able to chunk and slice this on the way for better CPU->GPU overlap. The main advantage is the ability to shorten the bus contention window between previous weight transfer and the next weights vbar fault. * bump aimdo * pinning updates * specify hostbuf max allocation size There a signs of virtual memory exhaustion on some linux systems when throwing 128GB for every little piece. Pass the actual to save aimdo from over-estimates * tests: update execution tests for caching The default caching changed to ram-cache so update these tests accordingly. Remove the LRU 0 test as this also falls through to RAM cache.
2026-05-21 10:03:58 +10:00
if destination2 is not None:
dst_orig_dtype = destination2._params.orig_dtype
Threaded Loader performance fixes / improvements (+ Aimdo 0.4.6) (#14116) * memory_management: Add direct to read GPU mode Make destination optional (or make it optionally GPU) and use aimdo to file_read direct to GPU. * ops: Remove stream pin buffers and use aimdo reads This consumed too much RAM and its better to just take the hit on the CPU syncing back the stream on a short ring buffer. Aimdo implements this so just rip the stream pin buffer from comfy. * model_management: all active pin registration movement Its better to just let the active model load past the pin limit as pins and let the pins move around. The saves the HDD and SATA people disk traffic while only costing a few GPU syncs. * utils: use aimdo file handle This opens on windows with more favourable flags * mp: only count the model proper for loaded_ram and vram Exclude live loras from the numbers to avoid the case where the reported loaded memory exceeds the size of the model. This causes me confusion in the Kijai visualizer when it looked fully loaded but was hitting disk due to this accounding disrepency. * utils: add bit reverse utility useful for max scattering something ordered. * pinned_memory: Implement offload balancing Use a max scatter alogorithm to prioritize pins of the same size such that when doing a little bit of offloading it gets scattered, allowing the prefetcher to more evenly swollow the offload. * comfy-aimdo 0.4.7 Aimdo 0.4.7 implement VRAM buffer exhaustion predection to avoid early speculative load of weights that definately wont fix once the inference gets further in. * model-prefetch: consolidate pin ensures on the sync point This could happen mid prefetch block, cause a sync of the entire block and lose overlap. Get ahead of the problem with a free down at the natural compute stream sync point. * mm: Put a 2GB min on the pin ceiling This is reasonably bad if it starts causing swap pressure, moreso than during normal ram-cache proceedings. Clamp it. * add --fast-disk
2026-05-31 05:20:04 +10:00
destination2._params.copy_from(destination._params if destination is not None else tensor._params, non_blocking=True)
Multi-threaded load of models from disk (big load time speedups & Offload to disk) (CORE-43,CORE-152,CORE-164,CORE-165,CORE-117) (#13802) * model_management: disable non-dynamic smart memory Disable smart memory outright for non dynamic models. This is a minor step towards deprecation of --disable-dynamic-vram and the legacy ModelPatcher. This is needed for estimate-free model development, where new models can opt-out of supplying a memory estimate and not have to worry about hard VRAM allocations due to legacy non-dynamic model patchers This is also a general stability increase for a lot of stray use cases where estimates may still be off and going forward we are not going to accurately maintain such estimates. * pinned_memory: implement with aimdo growable buffer Use a single growable buffer so we can do threaded pre-warming on pinned memory. * mm: use aimdo to do transfer from disk to pin Aimdo implements a faster threaded loader. * Add stream host pin buffer for AIMDO casts Introduce per-offload-stream HostBuffer reuse for pinned staging, include it in cast buffer reset synchronization. Defer actual casts that go via this pin path to a separate pass such that the buffer can be allocated monolithically (to avoid cudaHostRegister thrash). * remove old pin path * Implement JIT pinned memory pressure Replace the predictive pin pressure mechanism with JIT PIN memory pressure. * LowVRAMPatch: change to two-phase visit * lora: re-implement as inplace swiss-army-knife operation * prepare for multiple pin sets * implement pinned loras * requirements: comfy-aimdo 0.4.0 * ops: remove unused arg This was defeatured in aimdo iteration * ops: sync the CPU with only the offload stream activity This was syncing with the offload stream which itself is synced with the compute stream, so this was syncing CPU with compute transitively. Define the event to sync it more gently. * pins: implement freeing intermediate for pinned memory Pinning is more important than inactive intermediates and the stream pin buffer is more important than even active intermediates. * execution: implement pin eviction on RAM presure Add back proper pin freeing on RAM pressure * implement pin registration swaps Uncap the windows pins from 50% by extending the pool and have a pressure mechanism to move the pin reservations om demand. This unfortunately implies a GPU sync to do the freeing so significant hysterisis needs to be added to consolidate these pressure events. * cli_args/execution: Implement lower background cache-ram threshold Limit the amount of RAM background intermediates can use, so that switching workflows doesn't degrade performance too much. * make default * bump aimdo * model-patcher: force-cast tiny weights Flux 2 gets crazy stalls due to a mix of tiny and giant weights creating lopsided steam buffer rotations which creates stalls. * ops: refactor in prep for chunking * mm: delegate pin-on-the-way to aimdo Aimdo is able to chunk and slice this on the way for better CPU->GPU overlap. The main advantage is the ability to shorten the bus contention window between previous weight transfer and the next weights vbar fault. * bump aimdo * pinning updates * specify hostbuf max allocation size There a signs of virtual memory exhaustion on some linux systems when throwing 128GB for every little piece. Pass the actual to save aimdo from over-estimates * tests: update execution tests for caching The default caching changed to ram-cache so update these tests accordingly. Remove the LRU 0 test as this also falls through to RAM cache.
2026-05-21 10:03:58 +10:00
destination2._params = dataclasses.replace(destination2._params, orig_dtype=dst_orig_dtype)
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
return True
info = getattr(tensor.untyped_storage(), "_comfy_tensor_file_slice", None)
if info is None:
return False
Threaded Loader performance fixes / improvements (+ Aimdo 0.4.6) (#14116) * memory_management: Add direct to read GPU mode Make destination optional (or make it optionally GPU) and use aimdo to file_read direct to GPU. * ops: Remove stream pin buffers and use aimdo reads This consumed too much RAM and its better to just take the hit on the CPU syncing back the stream on a short ring buffer. Aimdo implements this so just rip the stream pin buffer from comfy. * model_management: all active pin registration movement Its better to just let the active model load past the pin limit as pins and let the pins move around. The saves the HDD and SATA people disk traffic while only costing a few GPU syncs. * utils: use aimdo file handle This opens on windows with more favourable flags * mp: only count the model proper for loaded_ram and vram Exclude live loras from the numbers to avoid the case where the reported loaded memory exceeds the size of the model. This causes me confusion in the Kijai visualizer when it looked fully loaded but was hitting disk due to this accounding disrepency. * utils: add bit reverse utility useful for max scattering something ordered. * pinned_memory: Implement offload balancing Use a max scatter alogorithm to prioritize pins of the same size such that when doing a little bit of offloading it gets scattered, allowing the prefetcher to more evenly swollow the offload. * comfy-aimdo 0.4.7 Aimdo 0.4.7 implement VRAM buffer exhaustion predection to avoid early speculative load of weights that definately wont fix once the inference gets further in. * model-prefetch: consolidate pin ensures on the sync point This could happen mid prefetch block, cause a sync of the entire block and lose overlap. Get ahead of the problem with a free down at the natural compute stream sync point. * mm: Put a 2GB min on the pin ceiling This is reasonably bad if it starts causing swap pressure, moreso than during normal ram-cache proceedings. Clamp it. * add --fast-disk
2026-05-31 05:20:04 +10:00
if destination is not None and destination.device.type != "cpu" and destination2 is None:
destination2 = destination
destination = None
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
file_obj = info.file_ref
Threaded Loader performance fixes / improvements (+ Aimdo 0.4.6) (#14116) * memory_management: Add direct to read GPU mode Make destination optional (or make it optionally GPU) and use aimdo to file_read direct to GPU. * ops: Remove stream pin buffers and use aimdo reads This consumed too much RAM and its better to just take the hit on the CPU syncing back the stream on a short ring buffer. Aimdo implements this so just rip the stream pin buffer from comfy. * model_management: all active pin registration movement Its better to just let the active model load past the pin limit as pins and let the pins move around. The saves the HDD and SATA people disk traffic while only costing a few GPU syncs. * utils: use aimdo file handle This opens on windows with more favourable flags * mp: only count the model proper for loaded_ram and vram Exclude live loras from the numbers to avoid the case where the reported loaded memory exceeds the size of the model. This causes me confusion in the Kijai visualizer when it looked fully loaded but was hitting disk due to this accounding disrepency. * utils: add bit reverse utility useful for max scattering something ordered. * pinned_memory: Implement offload balancing Use a max scatter alogorithm to prioritize pins of the same size such that when doing a little bit of offloading it gets scattered, allowing the prefetcher to more evenly swollow the offload. * comfy-aimdo 0.4.7 Aimdo 0.4.7 implement VRAM buffer exhaustion predection to avoid early speculative load of weights that definately wont fix once the inference gets further in. * model-prefetch: consolidate pin ensures on the sync point This could happen mid prefetch block, cause a sync of the entire block and lose overlap. Get ahead of the problem with a free down at the natural compute stream sync point. * mm: Put a 2GB min on the pin ceiling This is reasonably bad if it starts causing swap pressure, moreso than during normal ram-cache proceedings. Clamp it. * add --fast-disk
2026-05-31 05:20:04 +10:00
if (file_obj is None
or (destination is None and destination2 is None)
or (destination is not None and (destination.device.type != "cpu" or destination.numel() * destination.element_size() < info.size))
or (destination2 is not None and (destination2.device.type == "cpu" or destination2.numel() * destination2.element_size() < info.size))
or tensor.numel() * tensor.element_size() != info.size
or tensor.storage_offset() != 0
or not tensor.is_contiguous()):
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
return False
if info.size == 0:
return True
Threaded Loader performance fixes / improvements (+ Aimdo 0.4.6) (#14116) * memory_management: Add direct to read GPU mode Make destination optional (or make it optionally GPU) and use aimdo to file_read direct to GPU. * ops: Remove stream pin buffers and use aimdo reads This consumed too much RAM and its better to just take the hit on the CPU syncing back the stream on a short ring buffer. Aimdo implements this so just rip the stream pin buffer from comfy. * model_management: all active pin registration movement Its better to just let the active model load past the pin limit as pins and let the pins move around. The saves the HDD and SATA people disk traffic while only costing a few GPU syncs. * utils: use aimdo file handle This opens on windows with more favourable flags * mp: only count the model proper for loaded_ram and vram Exclude live loras from the numbers to avoid the case where the reported loaded memory exceeds the size of the model. This causes me confusion in the Kijai visualizer when it looked fully loaded but was hitting disk due to this accounding disrepency. * utils: add bit reverse utility useful for max scattering something ordered. * pinned_memory: Implement offload balancing Use a max scatter alogorithm to prioritize pins of the same size such that when doing a little bit of offloading it gets scattered, allowing the prefetcher to more evenly swollow the offload. * comfy-aimdo 0.4.7 Aimdo 0.4.7 implement VRAM buffer exhaustion predection to avoid early speculative load of weights that definately wont fix once the inference gets further in. * model-prefetch: consolidate pin ensures on the sync point This could happen mid prefetch block, cause a sync of the entire block and lose overlap. Get ahead of the problem with a free down at the natural compute stream sync point. * mm: Put a 2GB min on the pin ceiling This is reasonably bad if it starts causing swap pressure, moreso than during normal ram-cache proceedings. Clamp it. * add --fast-disk
2026-05-31 05:20:04 +10:00
if destination is None:
stream_ptr = getattr(stream, "cuda_stream", 0) if stream is not None else 0
comfy_aimdo.host_buffer.read_file_to_device(file_obj, info.offset, info.size,
stream_ptr, destination2.data_ptr(),
destination2.device.index,
mark_cold=False)
return True
Multi-threaded load of models from disk (big load time speedups & Offload to disk) (CORE-43,CORE-152,CORE-164,CORE-165,CORE-117) (#13802) * model_management: disable non-dynamic smart memory Disable smart memory outright for non dynamic models. This is a minor step towards deprecation of --disable-dynamic-vram and the legacy ModelPatcher. This is needed for estimate-free model development, where new models can opt-out of supplying a memory estimate and not have to worry about hard VRAM allocations due to legacy non-dynamic model patchers This is also a general stability increase for a lot of stray use cases where estimates may still be off and going forward we are not going to accurately maintain such estimates. * pinned_memory: implement with aimdo growable buffer Use a single growable buffer so we can do threaded pre-warming on pinned memory. * mm: use aimdo to do transfer from disk to pin Aimdo implements a faster threaded loader. * Add stream host pin buffer for AIMDO casts Introduce per-offload-stream HostBuffer reuse for pinned staging, include it in cast buffer reset synchronization. Defer actual casts that go via this pin path to a separate pass such that the buffer can be allocated monolithically (to avoid cudaHostRegister thrash). * remove old pin path * Implement JIT pinned memory pressure Replace the predictive pin pressure mechanism with JIT PIN memory pressure. * LowVRAMPatch: change to two-phase visit * lora: re-implement as inplace swiss-army-knife operation * prepare for multiple pin sets * implement pinned loras * requirements: comfy-aimdo 0.4.0 * ops: remove unused arg This was defeatured in aimdo iteration * ops: sync the CPU with only the offload stream activity This was syncing with the offload stream which itself is synced with the compute stream, so this was syncing CPU with compute transitively. Define the event to sync it more gently. * pins: implement freeing intermediate for pinned memory Pinning is more important than inactive intermediates and the stream pin buffer is more important than even active intermediates. * execution: implement pin eviction on RAM presure Add back proper pin freeing on RAM pressure * implement pin registration swaps Uncap the windows pins from 50% by extending the pool and have a pressure mechanism to move the pin reservations om demand. This unfortunately implies a GPU sync to do the freeing so significant hysterisis needs to be added to consolidate these pressure events. * cli_args/execution: Implement lower background cache-ram threshold Limit the amount of RAM background intermediates can use, so that switching workflows doesn't degrade performance too much. * make default * bump aimdo * model-patcher: force-cast tiny weights Flux 2 gets crazy stalls due to a mix of tiny and giant weights creating lopsided steam buffer rotations which creates stalls. * ops: refactor in prep for chunking * mm: delegate pin-on-the-way to aimdo Aimdo is able to chunk and slice this on the way for better CPU->GPU overlap. The main advantage is the ability to shorten the bus contention window between previous weight transfer and the next weights vbar fault. * bump aimdo * pinning updates * specify hostbuf max allocation size There a signs of virtual memory exhaustion on some linux systems when throwing 128GB for every little piece. Pass the actual to save aimdo from over-estimates * tests: update execution tests for caching The default caching changed to ram-cache so update these tests accordingly. Remove the LRU 0 test as this also falls through to RAM cache.
2026-05-21 10:03:58 +10:00
hostbuf = getattr(destination.untyped_storage(), "_comfy_hostbuf", None)
if hostbuf is not None:
stream_ptr = getattr(stream, "cuda_stream", 0) if stream is not None else 0
device_ptr = destination2.data_ptr() if destination2 is not None else 0
with info.lock:
hostbuf.read_file_slice(file_obj, info.offset, info.size,
offset=destination.data_ptr() - hostbuf.get_raw_address(),
stream=stream_ptr,
device_ptr=device_ptr,
device=None if destination2 is None else destination2.device.index)
Multi-threaded load of models from disk (big load time speedups & Offload to disk) (CORE-43,CORE-152,CORE-164,CORE-165,CORE-117) (#13802) * model_management: disable non-dynamic smart memory Disable smart memory outright for non dynamic models. This is a minor step towards deprecation of --disable-dynamic-vram and the legacy ModelPatcher. This is needed for estimate-free model development, where new models can opt-out of supplying a memory estimate and not have to worry about hard VRAM allocations due to legacy non-dynamic model patchers This is also a general stability increase for a lot of stray use cases where estimates may still be off and going forward we are not going to accurately maintain such estimates. * pinned_memory: implement with aimdo growable buffer Use a single growable buffer so we can do threaded pre-warming on pinned memory. * mm: use aimdo to do transfer from disk to pin Aimdo implements a faster threaded loader. * Add stream host pin buffer for AIMDO casts Introduce per-offload-stream HostBuffer reuse for pinned staging, include it in cast buffer reset synchronization. Defer actual casts that go via this pin path to a separate pass such that the buffer can be allocated monolithically (to avoid cudaHostRegister thrash). * remove old pin path * Implement JIT pinned memory pressure Replace the predictive pin pressure mechanism with JIT PIN memory pressure. * LowVRAMPatch: change to two-phase visit * lora: re-implement as inplace swiss-army-knife operation * prepare for multiple pin sets * implement pinned loras * requirements: comfy-aimdo 0.4.0 * ops: remove unused arg This was defeatured in aimdo iteration * ops: sync the CPU with only the offload stream activity This was syncing with the offload stream which itself is synced with the compute stream, so this was syncing CPU with compute transitively. Define the event to sync it more gently. * pins: implement freeing intermediate for pinned memory Pinning is more important than inactive intermediates and the stream pin buffer is more important than even active intermediates. * execution: implement pin eviction on RAM presure Add back proper pin freeing on RAM pressure * implement pin registration swaps Uncap the windows pins from 50% by extending the pool and have a pressure mechanism to move the pin reservations om demand. This unfortunately implies a GPU sync to do the freeing so significant hysterisis needs to be added to consolidate these pressure events. * cli_args/execution: Implement lower background cache-ram threshold Limit the amount of RAM background intermediates can use, so that switching workflows doesn't degrade performance too much. * make default * bump aimdo * model-patcher: force-cast tiny weights Flux 2 gets crazy stalls due to a mix of tiny and giant weights creating lopsided steam buffer rotations which creates stalls. * ops: refactor in prep for chunking * mm: delegate pin-on-the-way to aimdo Aimdo is able to chunk and slice this on the way for better CPU->GPU overlap. The main advantage is the ability to shorten the bus contention window between previous weight transfer and the next weights vbar fault. * bump aimdo * pinning updates * specify hostbuf max allocation size There a signs of virtual memory exhaustion on some linux systems when throwing 128GB for every little piece. Pass the actual to save aimdo from over-estimates * tests: update execution tests for caching The default caching changed to ram-cache so update these tests accordingly. Remove the LRU 0 test as this also falls through to RAM cache.
2026-05-21 10:03:58 +10:00
return True
Threaded Loader performance fixes / improvements (+ Aimdo 0.4.6) (#14116) * memory_management: Add direct to read GPU mode Make destination optional (or make it optionally GPU) and use aimdo to file_read direct to GPU. * ops: Remove stream pin buffers and use aimdo reads This consumed too much RAM and its better to just take the hit on the CPU syncing back the stream on a short ring buffer. Aimdo implements this so just rip the stream pin buffer from comfy. * model_management: all active pin registration movement Its better to just let the active model load past the pin limit as pins and let the pins move around. The saves the HDD and SATA people disk traffic while only costing a few GPU syncs. * utils: use aimdo file handle This opens on windows with more favourable flags * mp: only count the model proper for loaded_ram and vram Exclude live loras from the numbers to avoid the case where the reported loaded memory exceeds the size of the model. This causes me confusion in the Kijai visualizer when it looked fully loaded but was hitting disk due to this accounding disrepency. * utils: add bit reverse utility useful for max scattering something ordered. * pinned_memory: Implement offload balancing Use a max scatter alogorithm to prioritize pins of the same size such that when doing a little bit of offloading it gets scattered, allowing the prefetcher to more evenly swollow the offload. * comfy-aimdo 0.4.7 Aimdo 0.4.7 implement VRAM buffer exhaustion predection to avoid early speculative load of weights that definately wont fix once the inference gets further in. * model-prefetch: consolidate pin ensures on the sync point This could happen mid prefetch block, cause a sync of the entire block and lose overlap. Get ahead of the problem with a free down at the natural compute stream sync point. * mm: Put a 2GB min on the pin ceiling This is reasonably bad if it starts causing swap pressure, moreso than during normal ram-cache proceedings. Clamp it. * add --fast-disk
2026-05-31 05:20:04 +10:00
if not hasattr(file_obj, "seek") or not hasattr(file_obj, "readinto"):
return False
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
buf_type = ctypes.c_ubyte * info.size
view = memoryview(buf_type.from_address(destination.data_ptr()))
try:
with info.lock:
file_obj.seek(info.offset)
done = 0
while done < info.size:
try:
n = file_obj.readinto(view[done:])
except OSError:
return False
if n <= 0:
return False
done += n
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
return True
finally:
view.release()
class TensorGeometry(NamedTuple):
shape: any
dtype: torch.dtype
def element_size(self):
info = torch.finfo(self.dtype) if self.dtype.is_floating_point else torch.iinfo(self.dtype)
return info.bits // 8
def numel(self):
return math.prod(self.shape)
def tensors_to_geometries(tensors, dtype=None):
geometries = []
for t in tensors:
if t is None or isinstance(t, QuantizedTensor):
geometries.append(t)
continue
tdtype = t.dtype
if hasattr(t, "_model_dtype"):
tdtype = t._model_dtype
if dtype is not None:
tdtype = dtype
geometries.append(TensorGeometry(shape=t.shape, dtype=tdtype))
return geometries
def vram_aligned_size(tensor):
if isinstance(tensor, list):
return sum([vram_aligned_size(t) for t in tensor])
if isinstance(tensor, QuantizedTensor):
inner_tensors, _ = tensor.__tensor_flatten__()
return vram_aligned_size([ getattr(tensor, attr) for attr in inner_tensors ])
if tensor is None:
return 0
size = tensor.numel() * tensor.element_size()
aligment_req = 1024
return (size + aligment_req - 1) // aligment_req * aligment_req
def interpret_gathered_like(tensors, gathered):
offset = 0
dest_views = []
if gathered.dim() != 1 or gathered.element_size() != 1:
raise ValueError(f"Buffer must be 1D and single-byte (got {gathered.dim()}D {gathered.dtype})")
for tensor in tensors:
if tensor is None:
dest_views.append(None)
continue
if isinstance(tensor, QuantizedTensor):
inner_tensors, qt_ctx = tensor.__tensor_flatten__()
templates = { attr: getattr(tensor, attr) for attr in inner_tensors }
else:
templates = { "data": tensor }
actuals = {}
for attr, template in templates.items():
size = template.numel() * template.element_size()
if offset + size > gathered.numel():
raise ValueError(f"Buffer too small: needs {offset + size} bytes, but only has {gathered.numel()}. ")
actuals[attr] = gathered[offset:offset+size].view(dtype=template.dtype).view(template.shape)
offset += vram_aligned_size(template)
if isinstance(tensor, QuantizedTensor):
dest_views.append(QuantizedTensor.__tensor_unflatten__(actuals, qt_ctx, 0, 0))
else:
dest_views.append(actuals["data"])
return dest_views
aimdo_enabled = False
extra_ram_release_callback = None
RAM_CACHE_HEADROOM = 0
def set_ram_cache_release_state(callback, headroom):
global extra_ram_release_callback
global RAM_CACHE_HEADROOM
extra_ram_release_callback = callback
RAM_CACHE_HEADROOM = max(0, int(headroom))
Multi-threaded load of models from disk (big load time speedups & Offload to disk) (CORE-43,CORE-152,CORE-164,CORE-165,CORE-117) (#13802) * model_management: disable non-dynamic smart memory Disable smart memory outright for non dynamic models. This is a minor step towards deprecation of --disable-dynamic-vram and the legacy ModelPatcher. This is needed for estimate-free model development, where new models can opt-out of supplying a memory estimate and not have to worry about hard VRAM allocations due to legacy non-dynamic model patchers This is also a general stability increase for a lot of stray use cases where estimates may still be off and going forward we are not going to accurately maintain such estimates. * pinned_memory: implement with aimdo growable buffer Use a single growable buffer so we can do threaded pre-warming on pinned memory. * mm: use aimdo to do transfer from disk to pin Aimdo implements a faster threaded loader. * Add stream host pin buffer for AIMDO casts Introduce per-offload-stream HostBuffer reuse for pinned staging, include it in cast buffer reset synchronization. Defer actual casts that go via this pin path to a separate pass such that the buffer can be allocated monolithically (to avoid cudaHostRegister thrash). * remove old pin path * Implement JIT pinned memory pressure Replace the predictive pin pressure mechanism with JIT PIN memory pressure. * LowVRAMPatch: change to two-phase visit * lora: re-implement as inplace swiss-army-knife operation * prepare for multiple pin sets * implement pinned loras * requirements: comfy-aimdo 0.4.0 * ops: remove unused arg This was defeatured in aimdo iteration * ops: sync the CPU with only the offload stream activity This was syncing with the offload stream which itself is synced with the compute stream, so this was syncing CPU with compute transitively. Define the event to sync it more gently. * pins: implement freeing intermediate for pinned memory Pinning is more important than inactive intermediates and the stream pin buffer is more important than even active intermediates. * execution: implement pin eviction on RAM presure Add back proper pin freeing on RAM pressure * implement pin registration swaps Uncap the windows pins from 50% by extending the pool and have a pressure mechanism to move the pin reservations om demand. This unfortunately implies a GPU sync to do the freeing so significant hysterisis needs to be added to consolidate these pressure events. * cli_args/execution: Implement lower background cache-ram threshold Limit the amount of RAM background intermediates can use, so that switching workflows doesn't degrade performance too much. * make default * bump aimdo * model-patcher: force-cast tiny weights Flux 2 gets crazy stalls due to a mix of tiny and giant weights creating lopsided steam buffer rotations which creates stalls. * ops: refactor in prep for chunking * mm: delegate pin-on-the-way to aimdo Aimdo is able to chunk and slice this on the way for better CPU->GPU overlap. The main advantage is the ability to shorten the bus contention window between previous weight transfer and the next weights vbar fault. * bump aimdo * pinning updates * specify hostbuf max allocation size There a signs of virtual memory exhaustion on some linux systems when throwing 128GB for every little piece. Pass the actual to save aimdo from over-estimates * tests: update execution tests for caching The default caching changed to ram-cache so update these tests accordingly. Remove the LRU 0 test as this also falls through to RAM cache.
2026-05-21 10:03:58 +10:00
def extra_ram_release(target, free_active=False):
if extra_ram_release_callback is None:
return 0
Multi-threaded load of models from disk (big load time speedups & Offload to disk) (CORE-43,CORE-152,CORE-164,CORE-165,CORE-117) (#13802) * model_management: disable non-dynamic smart memory Disable smart memory outright for non dynamic models. This is a minor step towards deprecation of --disable-dynamic-vram and the legacy ModelPatcher. This is needed for estimate-free model development, where new models can opt-out of supplying a memory estimate and not have to worry about hard VRAM allocations due to legacy non-dynamic model patchers This is also a general stability increase for a lot of stray use cases where estimates may still be off and going forward we are not going to accurately maintain such estimates. * pinned_memory: implement with aimdo growable buffer Use a single growable buffer so we can do threaded pre-warming on pinned memory. * mm: use aimdo to do transfer from disk to pin Aimdo implements a faster threaded loader. * Add stream host pin buffer for AIMDO casts Introduce per-offload-stream HostBuffer reuse for pinned staging, include it in cast buffer reset synchronization. Defer actual casts that go via this pin path to a separate pass such that the buffer can be allocated monolithically (to avoid cudaHostRegister thrash). * remove old pin path * Implement JIT pinned memory pressure Replace the predictive pin pressure mechanism with JIT PIN memory pressure. * LowVRAMPatch: change to two-phase visit * lora: re-implement as inplace swiss-army-knife operation * prepare for multiple pin sets * implement pinned loras * requirements: comfy-aimdo 0.4.0 * ops: remove unused arg This was defeatured in aimdo iteration * ops: sync the CPU with only the offload stream activity This was syncing with the offload stream which itself is synced with the compute stream, so this was syncing CPU with compute transitively. Define the event to sync it more gently. * pins: implement freeing intermediate for pinned memory Pinning is more important than inactive intermediates and the stream pin buffer is more important than even active intermediates. * execution: implement pin eviction on RAM presure Add back proper pin freeing on RAM pressure * implement pin registration swaps Uncap the windows pins from 50% by extending the pool and have a pressure mechanism to move the pin reservations om demand. This unfortunately implies a GPU sync to do the freeing so significant hysterisis needs to be added to consolidate these pressure events. * cli_args/execution: Implement lower background cache-ram threshold Limit the amount of RAM background intermediates can use, so that switching workflows doesn't degrade performance too much. * make default * bump aimdo * model-patcher: force-cast tiny weights Flux 2 gets crazy stalls due to a mix of tiny and giant weights creating lopsided steam buffer rotations which creates stalls. * ops: refactor in prep for chunking * mm: delegate pin-on-the-way to aimdo Aimdo is able to chunk and slice this on the way for better CPU->GPU overlap. The main advantage is the ability to shorten the bus contention window between previous weight transfer and the next weights vbar fault. * bump aimdo * pinning updates * specify hostbuf max allocation size There a signs of virtual memory exhaustion on some linux systems when throwing 128GB for every little piece. Pass the actual to save aimdo from over-estimates * tests: update execution tests for caching The default caching changed to ram-cache so update these tests accordingly. Remove the LRU 0 test as this also falls through to RAM cache.
2026-05-21 10:03:58 +10:00
return extra_ram_release_callback(target, free_active=free_active)