Files
ComfyUI/comfy/memory_management.py

144 lines
4.4 KiB
Python
Raw Normal View History

import math
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
import ctypes
import threading
import dataclasses
import torch
from typing import NamedTuple
from comfy.quant_ops import QuantizedTensor
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
class TensorFileSlice(NamedTuple):
file_ref: object
thread_id: int
offset: int
size: int
def read_tensor_file_slice_into(tensor, destination):
if isinstance(tensor, QuantizedTensor):
if not isinstance(destination, QuantizedTensor):
return False
if tensor._layout_cls != destination._layout_cls:
return False
if not read_tensor_file_slice_into(tensor._qdata, destination._qdata):
return False
dst_orig_dtype = destination._params.orig_dtype
destination._params.copy_from(tensor._params, non_blocking=False)
destination._params = dataclasses.replace(destination._params, orig_dtype=dst_orig_dtype)
return True
info = getattr(tensor.untyped_storage(), "_comfy_tensor_file_slice", None)
if info is None:
return False
file_obj = info.file_ref
if (destination.device.type != "cpu"
or file_obj is None
or threading.get_ident() != info.thread_id
or destination.numel() * destination.element_size() < info.size
or tensor.numel() * tensor.element_size() != info.size
or tensor.storage_offset() != 0
or not tensor.is_contiguous()):
comfy aimdo 0.2.11 + Improved RAM Pressure release strategies - Windows speedups (#12925) * Implement seek and read for pins Source pins from an mmap is pad because its its a CPU->CPU copy that attempts to fully buffer the same data twice. Instead, use seek and read which avoids the mmap buffering while usually being a faster read in the first place (avoiding mmap faulting etc). * pinned_memory: Use Aimdo pinner The aimdo pinner bypasses pytorches CPU allocator which can leak windows commit charge. * ops: bypass init() of weight for embedding layer This similarly consumes large commit charge especially for TEs. It can cause a permanement leaked commit charge which can destabilize on systems close to the commit ceiling and generally confuses the RAM stats. * model_patcher: implement pinned memory counter Implement a pinned memory counter for better accounting of what volume of memory pins have. * implement touch accounting Implement accounting of touching mmapped tensors. * mm+mp: add residency mmap getter * utils: use the aimdo mmap to load sft files * model_management: Implement tigher RAM pressure semantics Implement a pressure release on entire MMAPs as windows does perform faster when mmaps are unloaded and model loads free ramp into fully unallocated RAM. Make the concept of freeing for pins a completely separate concept. Now that pins are loadable directly from original file and don' touch the mmap, tighten the freeing budget to just the current loaded model - what you have left over. This still over-frees pins, but its a lot better than before. So after the pins are freed with that algorithm, bounce entire MMAPs to free RAM based on what the model needs, deducting off any known resident-in-mmap tensors to the free quota to keep it as tight as possible. * comfy-aimdo 0.2.11 Comfy aimdo 0.2.11 * mm: Implement file_slice path for QT * ruff * ops: put meta-tensors in place to allow custom nodes to check geo
2026-03-13 19:18:08 -07:00
return False
if info.size == 0:
return True
buf_type = ctypes.c_ubyte * info.size
view = memoryview(buf_type.from_address(destination.data_ptr()))
try:
file_obj.seek(info.offset)
done = 0
while done < info.size:
try:
n = file_obj.readinto(view[done:])
except OSError:
return False
if n <= 0:
return False
done += n
return True
finally:
view.release()
class TensorGeometry(NamedTuple):
shape: any
dtype: torch.dtype
def element_size(self):
info = torch.finfo(self.dtype) if self.dtype.is_floating_point else torch.iinfo(self.dtype)
return info.bits // 8
def numel(self):
return math.prod(self.shape)
def tensors_to_geometries(tensors, dtype=None):
geometries = []
for t in tensors:
if t is None or isinstance(t, QuantizedTensor):
geometries.append(t)
continue
tdtype = t.dtype
if hasattr(t, "_model_dtype"):
tdtype = t._model_dtype
if dtype is not None:
tdtype = dtype
geometries.append(TensorGeometry(shape=t.shape, dtype=tdtype))
return geometries
def vram_aligned_size(tensor):
if isinstance(tensor, list):
return sum([vram_aligned_size(t) for t in tensor])
if isinstance(tensor, QuantizedTensor):
inner_tensors, _ = tensor.__tensor_flatten__()
return vram_aligned_size([ getattr(tensor, attr) for attr in inner_tensors ])
if tensor is None:
return 0
size = tensor.numel() * tensor.element_size()
aligment_req = 1024
return (size + aligment_req - 1) // aligment_req * aligment_req
def interpret_gathered_like(tensors, gathered):
offset = 0
dest_views = []
if gathered.dim() != 1 or gathered.element_size() != 1:
raise ValueError(f"Buffer must be 1D and single-byte (got {gathered.dim()}D {gathered.dtype})")
for tensor in tensors:
if tensor is None:
dest_views.append(None)
continue
if isinstance(tensor, QuantizedTensor):
inner_tensors, qt_ctx = tensor.__tensor_flatten__()
templates = { attr: getattr(tensor, attr) for attr in inner_tensors }
else:
templates = { "data": tensor }
actuals = {}
for attr, template in templates.items():
size = template.numel() * template.element_size()
if offset + size > gathered.numel():
raise ValueError(f"Buffer too small: needs {offset + size} bytes, but only has {gathered.numel()}. ")
actuals[attr] = gathered[offset:offset+size].view(dtype=template.dtype).view(template.shape)
offset += vram_aligned_size(template)
if isinstance(tensor, QuantizedTensor):
dest_views.append(QuantizedTensor.__tensor_unflatten__(actuals, qt_ctx, 0, 0))
else:
dest_views.append(actuals["data"])
return dest_views
aimdo_enabled = False