Instead of fiddling manually with the imports, which worked well, but
comes at a cost of complexity— we are now using the canonical import
manager. This simplifies deletion, insertion and updating of imports.
Notably, our import manager is not super great at preserving whitespaces
right now, but we assume a formatter runs over migrated code anyway.
PR Close#57318
Introduces a best effort mode for the signal input migration. This mode
can be used to aggresively migrate as much as possible, ignoring most
of the incompatibility reasons, like "writes to the input".
PR Close#57318
Errors during change detection from `ApplicationRef.tick` are only
reported to the `ErrorHandler`. By default, this only logs the error to
console. As a result, these errors can be missed/ignored and allow tests
to pass when they should not. This change ensures that the errors are
surfaced. Note that this is already the behavior when zoneless is
enabled.
BREAKING CHANGE: Errors that are thrown during `ApplicationRef.tick`
will now be rethrown when using `TestBed`. These errors should be
resolved by ensuring the test environment is set up correctly to
complete change detection successfully. There are two alternatives to
catch the errors:
* Instead of waiting for automatic change detection to happen, trigger
it synchronously and expect the error. For example, a jasmine test
could write `expect(() => TestBed.inject(ApplicationRef).tick()).toThrow()`
* `TestBed` will reject any outstanding `ComponentFixture.whenStable` promises. A jasmine test,
for example, could write `expectAsync(fixture.whenStable()).toBeRejected()`.
As a last resort, you can configure errors to _not_ be rethrown by
setting `rethrowApplicationErrors` to `false` in `TestBed.configureTestingModule`.
PR Close#57200
This change aligns the behavior of the error handler in the
`ExtraOptions` of `RouterModule.forRoot` with the error handler in
`withNavigationErrorHandler`. The changes are:
* Slightly different timing: The handler is called before the
`NavigationError` emits
* Runs in the injection context, meaning it is more configurable at the
config location rather than needing to assign the value to the
`Router.errorHandler` later to get access to injectables
* Can now return `RedirectCommand` to recover from the error and
redirect without emitting `NavigationError`
* No longer allows arbitrarily overriding return value of the navigation
promise
BREAKING CHANGE: The `Router.errorHandler` property has been removed.
Adding an error handler should be configured in either
`withNavigationErrorHandler` with `provideRouter` or the `errorHandler`
property in the extra options of `RouterModule.forRoot`. In addition,
the error handler cannot be used to change the return value of the
router navigation promise or prevent it from rejecting. Instead, if you
want to prevent the promise from rejecting, use `resolveNavigationPromiseOnError`.
PR Close#57050
This commit updates the interface of `Resolve` to allow for
`RedirectCommand`, as was done with `ResolveFn` in v18.
fixes#57131
BREAKING CHANGE: The return type of the `Resolve` interface now includes
`RedirectCommand`.
PR Close#57309
This commit adds an input to `RouterOutlet` that allows developers to
pass data from a parent component to the outlet components.
Setting the `routerOutletData` input on `RouterOutlet` makes the value
available to the child component injectors via the `ROUTER_OUTLET_DATA`
token. This token uses a `Signal` type to allow updating the input value
and propogating it to the token rather than needing to make the value
static.
resolves#46283
PR Close#57051
This commit updates serialization and hydration i18n logic to take into account situations when i18n blocks are located within "skip hydration" blocks.
Resolves#57105.
PR Close#57299
Previously, if a component injects a `ViewContainerRef`, the post-hydration cleanup process doesn't visit inner views to cleanup dehydrated views in nested LContainers. This commit updates the logic to recognize this situation and enter host LView to complete cleanup.
Resolves#56989.
PR Close#57300
By default, we don't migrate inputs if they are part of e.g. `@if` for
now. That is because we don't have the template narrowing feature
available yet.
To improve impact of the migration until we have the narrowing, we add
some additional checks that allow us to migrate instances of inputs that
are part of e.g. `@if` but are actually not used inside (and hence are
guaranteed to be _not_ narrowed).
PR Close#57308
This commit updates the inside/outside NgZone detection of the hybrid CD
scheduling to track the actual instance of the NgZone being used rather
than the name "Angular" (how `isInsideAngularZone` works). This allows
the scheduling to work correctly when there are multiple versions of
Angular running on the page.
fixes#57261
PR Close#57267
Currently in some scenarios the compiler generates code like `null as any ? foo : bar` which will be invalid with [an upcoming TypeScript change](https://devblogs.microsoft.com/typescript/announcing-typescript-5-6-beta/#disallowed-nullish-and-truthy-checks). These changes switch to generating `0 as any` which is exempt from the change.
**Note:** I'm not starting the work to fully get us on TS 5.6 until the 18.2 release comes out, but this change is necessary to unblock an internal team.
PR Close#57303
This changes the migration so that we don't generate `_1` suffixes when
a temporary variable wouldn't conflict with any variables in the lexical
scope.
In addition, if we discover conflicts, we try alternative suffixes that
seem more natural and follow style guides. E.g. `Value`, `Val` or
`Input`.
PR Close#57292
Currently we use some short variable names like `t` and `r` in the generated factory functions. They can conflict with local symbols with the same names, if they're used for DI.
These changes rename the parameters to reduce the change for conflicts.
Fixes#57168.
PR Close#57181
This commit addresses a performance bottleneck in the `interpolatedSignalNotInvoked` extended
diagnostic by querying directive metadata instead of consulting the type-checker to determine if
a property binding corresponds with an input.
Fixes#57287
PR Close#57291
These changes replace most usages of `removeChild` with `remove`. The latter has the advantage of not having to look up the `parentNode` and ensure that the child being removed actually belongs to the specific parent.
The refactor should be fairly safe since all the browsers we cover support `remove`. [Something similar was done in Components](https://github.com/angular/components/pull/23592) some time ago and there haven't been any bug reports as a result.
PR Close#57203
From the internal issue on the matter:
> When using the standard Jasmine version of it promises returned by the body function are automatically awaited. The Catalyst version of it is fake-async, so awaiting the promise does not make sense; however it would be nice if Catalyst automatically flushed the promise to replicate the experience of using standard it. This would allow users to do the following:
```
it('should fail later', async () => {
await new Promise(r => setTimeout(r));
fail('failure');
});
```
> In Catalyst today the above test will pass. If this proposal to automatically flush the resulting promise were implemented it would fail.
Flushing after the tests complete has been the default behavior inside
Google since 2020. Very few tests remain that use the old behavior of
only flushing microtasks. The example above would actually fail with
`fakeAsync` due to the pending timer, but the argument still remains the
same. We might as well just flush if we're going to fail the test
anyways by throwing if there's no flush at the end.
BREAKING CHANGE: `fakeAsync` will now flush pending timers at the end of
the given function by default. To opt-out of this, you can use `{flush:
false}` in options parameter of `fakeAsync`
PR Close#57240
From the internal issue on the matter:
> When using the standard Jasmine version of it promises returned by the body function are automatically awaited. The Catalyst version of it is fake-async, so awaiting the promise does not make sense; however it would be nice if Catalyst automatically flushed the promise to replicate the experience of using standard it. This would allow users to do the following:
```
it('should fail later', async () => {
await new Promise(r => setTimeout(r));
fail('failure');
});
```
> In Catalyst today the above test will pass. If this proposal to automatically flush the resulting promise were implemented it would fail.
Flushing after the tests complete has been the default behavior inside
Google since 2020. Very few tests remain that use the old behavior of
only flushing microtasks. The example above would actually fail with
`fakeAsync` due to the pending timer, but the argument still remains the
same. We might as well just flush if we're going to fail the test
anyways by throwing if there's no flush at the end.
PR Close#57239
Similar to a previous fix that intended to make the JIT transforms
compatible with pre-transforms like e.g. Tsickle, we need to solve
an additional issue where the class properties are synthetic and result
in an `getSourceFile() => undefined` invocation that breaks the import
insertion, causing errors like:
```
TypeError: Cannot read properties of undefined (reading 'fileName')
```
PR Close#57262
From the internal issue on the matter:
> When using the standard Jasmine version of it promises returned by the body function are automatically awaited. The Catalyst version of it is fake-async, so awaiting the promise does not make sense; however it would be nice if Catalyst automatically flushed the promise to replicate the experience of using standard it. This would allow users to do the following:
```
it('should fail later', async () => {
await new Promise(r => setTimeout(r));
fail('failure');
});
```
> In Catalyst today the above test will pass. If this proposal to automatically flush the resulting promise were implemented it would fail.
Flushing after the tests complete has been the default behavior inside
Google since 2020. Very few tests remain that use the old behavior of
only flushing microtasks. The example above would actually fail with
`fakeAsync` due to the pending timer, but the argument still remains the
same. We might as well just flush if we're going to fail the test
anyways by throwing if there's no flush at the end.
PR Close#57137
Angular's template files are not valid TypeScript. Attempting to get suggestion
diagnostics from the underlying TypeScript language service will result in
a large amount of false positives. Only actual TypeScript files should
be analyzed by the underlying TypeScript language service for suggestions.
PR Close#56241
This commit adds an option to specify the default value for
`queryParamsHandling` in `Router.createUrlTree` when another option is
not specified (or is `null|undefined`).
resolves#12664
PR Close#57198
This was an old feature that mapped shift + click (et al) to "clickmod". This doesn't really make sense to add to Angular, so let's remove it.
PR Close#57201
Lock file maintenance updated Terser, which impacts the bundle
optimizations being tested via the symbol golden tests.
There was a small noticable change in the symbol golden where
`withDomHydration` is now preserved, and the underlying function
that was previously detected is gone. Seemingly Terser now inlines
this function and had to preserve `withDomHydration` as the entry point.
PR Close#57205
This commit is similar to 98ed5b609e, and
makes use of the preparation work implemented there.
Similar to directives and components marked via `jit: true`, we also
need to do the same for JIT marked `@NgModule` classes. This is mostly
important for downleveling of decorators to support dependency injection
of such classes.
Inside Google3, migrating from `ts_library` to `ng_module` turns of
decorator downleveling, so the `jit: true` for NgModule's is implicitly
requesting/reliant on this transform— as expected.
PR Close#57212
Rather than leaving the timers around as no-ops, this commit updates the
logic to also attempt to clear or cancel the timers. This is helpful for
the eventual goal of running the scheduler in the `fakeAsync` zone (if
the test is running in `fakeAsync`) rather than scheduling in the root
zone and making it impossible to flush.
PR Close#57186
This creates a private option that can be used internally while we
migrate this to the default and only behavior. ~200 tests in TGP have errors
that are being swallowed (console.log) and not causing the test to fail.
We can first explicitly opt those out, flip the default internally, then
"fix" them by adding expect...toThrow.
PR Close#57153
This commit adds the `ImagePerformanceWarning` to the common bootstrap
code rather than only starting it when using `bootstrapApplication`.
PR Close#57060
This commit de-duplicates the code for bootstrapping between
`bootstrapApplication` and `bootstrapModule`. A majority of the
bootstrap code was identical between the two, with some minor
differences that can be handled with a function overload.
PR Close#57060
This commit allows configuring `NgZone` through the providers for
`bootstrapModule`. Prior to this change, developers had to configure
`NgZone` in the `BootstrapOptions`.
PR Close#57060
Fixes that we were throwing an assertion error during hydration if a `@let` declaration is used before and immediately inside of a container.
Fixes#57160.
PR Close#57173
To increase the ease of development we are moving @angular/docs into the adev directory within this repo. While
we are doing this to improve our development experience in the short term, efforts are also in place
to maintain a division between this @angular/docs (shared) code and adev itself, so that it can be extracted
back out in the future when components is ready to leverage it as well.
PR Close#57132
The behavior of `ComponentFixture` for zoneless tests was decided somewhat through guesswork, trial, and error. In addition, working on the zoneless fixture revealed oddities in the behavior of the zone-based fixture, or behaviors that we felt were counterintuitive. The most consequential difference is how change detection works: `detectChanges` goes through ApplicationRef.tick in zoneless while it is `changeDetectorRef.detectChanges` in the zone fixture.
We felt that running change detection through `ApplicationRef.tick` was important for several reasons:
* Aligning application behavior more closely with the test behavior (almost all views are attached to application ref in reality)
* Ensuring that afterRender* hooks are executed when calling `fixture.detectChanges`
* Ensuring that the change detection runs again if render hooks update state
This change, however, has some noticeable consequences that will break some tests, mostly around how errors are handled. `ApplicationRef.tick` catches errors that happen during change detection and reports them to the ErrorHandler from DI. The default error handler only logs the error to the console. This will break tests which have `expect(() => fixture.detectChanges()).toThrow()`. In addition, it allows tests to pass when there are real errors encountered during change detection.
This change ensures that errors from `ApplicationRef.tick` are rethrown
and will fail the test. We should also do a follow-up investigation to
determine whether we can/should also do this for the zone-based
`ComponentFixture`.
fixes#56977
PR Close#56993
The `inject` migration can leave some unused imports behind when it removes decorators like `@Inject`. These changes add some logic to remove them.
PR Close#57179
Paul Gschwendtner